shear type
英 [ʃɪə(r) taɪp]
美 [ʃɪr taɪp]
网络 剪切型
双语例句
- Gold deposit in the mineralization belt belongs to that ofductile shear zone type.
成矿带内的金矿属韧性剪切带型金矿。 - So far, the study about ductile shear zone type gold deposit has formed rather mature methods and contents.
目前，关于韧性剪切带型金矿已经有了相当成熟的研究方法和较为完善的研究内容。 - The mechanical model for the floor heave of shear dilation type and its analytic calculation diagram are established in accordance with the constitutive relationship of laneway wall rock.
根据巷道围岩本构关系，建立了剪胀底臌力学模型及分析计算简图，根据岩土体主动和被动压力作用原理，导出了巷道底板塑性区发展范围、深度及底板压力解析计算式。 - As compared with Shear Type KR Vessel, FWACTV raises the efficiency of agitated mixing.
与“剪切型”的KR法相比，这种反应器提高了混合效率。 - Therefore, Kanggur gold deposit is not that of shear zone type.
因此，康古尔金矿不能被称为剪切带型金矿。 - Analyses of the shear type and the three-dimensional deformation demonstrate that the QDSZ belongs to a lengthening-broadening shear zone with the lengthening quite obvious along the Y-axis.
剪切作用类型及三维参照变形分析表明，青邑韧性剪切带属加长一变宽类型的一般剪切带并且在Y轴方向上有所增长。 - The optimal design of the cutting thread shear type low-cost energy-absorbing structures for medium car
面向中级轿车的低成本螺纹剪切吸能结构优化设计 - It belongs to the ductile shear zone type of a gold deposit in the greenstone belt.
矿床受元古界基性、酸性双峰式火山岩层位及韧性剪切带双重控制，属绿岩带中的韧性剪切带型金矿床。 - Key Points on Tension Rod Installation by Using shear Type Constant Force Tester
用剪式恒力仪安装拉杆须注意的要点 - The 2-mass shear type computation model and influence coefficient of aspect ratio are provided in the paper for analyzing the isolated structure system with large aspect ratio.
针对大高宽比隔震结构体系，提出了两质点系剪切型简化计算模型、高宽比影响系数的概念和计算式。 - The distribution of instantaneous input energy in shear type MDOF system
剪切型多自由度体系瞬时输入能量的分布 - The results show that the methods developed in this paper are reliable, which can reasonably simulate the seismic collapse process of reinforced concrete frame structures with shear type deformation.
算例表明，本文方法是有效的，可以较正确地分析剪切型框架结构的倒塌破坏过程。 - According to result of calculation, three failure types are obtained by analyzing the stress and strain of shaped steels, that is beam failure type, mixed failure type and shear failure type.
根据有限元计算结果，对型钢和混凝土的应力应变进行分析，得到了节点的三种失效模式：梁铰型、混合型和节点核心区剪切型。 - Extensional kinematics and shear type of the Hohhot metamorphic core complex, Inner Mongolia
呼和浩特变质核杂岩伸展运动学特征及剪切作用类型 - We must pay attention to the southern warm thermal advection as well as the northern cold thermal advection in the cold front shear type rainstorm process.
在该型暴雨的发生过程中，北部冷平流具有十分重要的作用，但南部暖平流的作用也不可忽视。 - Reliability analysis of shear type structures subjected to earthquake
地震作用下剪切型结构的可靠性分析 - Proper cognition about resisting shear type high strength bolt
正确认识抗剪型高强螺栓 - Shear type and combination type. Calculation model of deflection sedimentation and equivalent loading of bending deflection of building are established according to the bending theory of material mechanics.
根据材料力学的弯曲理论，确定了建筑物单侧偏沉降的计算简图以及弯曲变形的等效荷载，由混凝土和砖砌体的弹模比，计算得到单片墙体带有圈梁砌体的抗弯刚度。 - Genetic model of ductile shear type gold deposits in Wutai Mountain Area
五台山地区韧性剪切带型金矿成因 - The earthquake actions of shear type, shear-bending type and bending type regular highrise buildings are analyzed by using the modal analysis through response spectrum procedure and lumped mass story models in this paper.
本文采用剪切型、剪弯型及弯曲型结构的集中质量层间模型，利用振型分解反应谱法分析了它们的地震作用。 - Based on the shear wave formulation, this paper presents a new method to calculate horizontal seismic responses of multistory shear type structures.
基于结构侧向位移的剪切波动方程，提出分析多层剪切型结构水平地震反应的新方法。 - Based on the shear type computation model and influence coefficient of aspect ratio, the acceleration response, displacement response and shear force of super structure are proposed for isolated structure system with large aspect ratio.
基于剪切型简化计算模型和高宽比影响系数，建立了大高宽比隔震结构最大加速度反应、隔震层位移反应、上部结构层间剪力等地震反应预测理论。 - The stationary random responses of non linear shear type Multi Degrees of Freedom ( MDOF) hysteretic systems are analyzed by using the Pseudo Excitation Method ( PEM) combined with the Equivalent Linearization Method ( ELM).
运用虚拟激励法结合等效线性化法分析了剪切型多自由度滞迟系统的平稳随机地震响应。 - On elasto-plastic deformations of multi-storey shear type structures due to earthquake effect
论地震作用下多层剪切型结构的弹塑性变形计算 - According to the characteristics of probability and statistics of seismic action, random response of shear type high-layer structures in combined action of horizontal and rocking ground motions was discussed.
根据地震作用的概率统计特征，研究剪切型高层结构在地震动的水平与摇摆分量联合作用下的随机反应。 - The fracture mechanism and the load-slippage rule of each studied shear connector type have been analysed;
分析不同类型剪力键的破坏机制及荷载-滑移规律； - Nonlinear seismic response calculation for shear type models
剪切模型弹塑性地震反应计算 - For the evaluation of maximum storey drifts of multi-storeyed shear type structures due to nonlinear seismic responses a simple method is presented for the application of the deformation checking method in aseismic design.
文中对确定多层剪切型结构最大弹塑性层间变形，提出一实用方法，简化了在抗震设计中结构变形的计算和当其进入破坏阶段时的变形验算。 - The ductile shear zone type is the dominant metallogenic type.
剪切带型金矿是本区主要成矿类型。